Features: Radwire is rotary die cut in a continuous roll for easy installation. The Radwire can be used alone or with our various car stripes and versatile graphic kits to get a look that is all your own. This barbed wire graphic is exceptionally engineered high performance, 2 mil cast vinyl with permanent acrylic, pressure sensitive adhesive for the most demanding OEM automotive standards. This is 'the best' in the industry. These stripes have unmatched quality and are perfect for outdoor durability on all auto, RV and marine applications . We have a wide variety of size and color choices available in various configurations.
Exterior Durability:5 to 7 years
Application Instructions:Application is best if applied in temperatures between 55 and 85 degrees fahrenheit 1. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease(see our installation supplies for cleaner). 2. Remove back paper liner exposing adhesive. 3. Position striping, being careful not to stretch the vinyl. 4. Lay striping onto the application surface, then go over the entire surface gently with an application squeegee to ensure bond. 5. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. 6.To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.