Dimensions:This is our 5 3/4" x 50 foot double line, single color stripe roll.(4 3/8" larger stripe, 3/8" void, 1" smaller stripe)
Features: This is a long awaited and wildly popular vinyl stripe roll to use as a break line for two tone autos and boats. You can even change out the 1" stripe for a great two tone effect.This is exceptionally engineered 3M or Avery, high performance, 2 mil cast vinyl with permanent acrylic, pressure sensitive adhesive for the most demanding OEM automotive standards. This is 'the best' in the industry car pinstripe tape. These stripes have unmatched quality and are perfect for outdoor durability on all auto, RV and marine applications . We have a wide variety of size and color choices available in various configurations.
Exterior Durability: 5 to 7 years
Application Instructions:Application is best if applied in temperatures between 55 and 85 degrees fahrenheit 1. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease(see our installation supplies for cleaner). 2. Remove back paper liner exposing adhesive. 3. Position striping, being careful not to stretch the vinyl. 4. Lay striping onto the application surface, then go over the entire surface gently with an application squeegee to ensure bond. 5. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. 6.To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.