Fits Model Year(s):  2010 2011 2012 2013 2014 Ford Mustang

Dimensions: This kit is precut to fit the 2010-2014 Mustang body style. 

Features: Dot matrix pattern and stripe printed on clear base material. Model name is stenciled into the design where "TEST HERE" appears in photo

Exterior Durability: 5 to 7 years (Extend the life of your vinyl with once a month applications of 303 Aerospace Protectant. Thousands of happy customers. Sold separately)

Application Instructions: Application is best if applied in temperatures between 55 and 85 degrees fahrenheit 1. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease(see our installation supplies for cleaner). 2. Remove back paper liner exposing adhesive. 3. Position striping, being careful not to stretch the vinyl. 4. Lay striping onto the application surface, then go over the entire surface gently with an application squeegee to ensure bond. 5. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. 6.To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.

NOTE:  Having been in the auto graphics industry since the mid 80's we consider ourselves experts in the field of vinyl. Please see our FAQ section for details on the difference between high performance(cast) and intermediate(calendured) material as well as links to 3M for your own research. The details may surprise you.