Dimensions:2 inch X 50 foot or 2 inch X 150 foot roll
Features: These Single Line Single Color Vinyl Stripe Rolls are exceptional 3M or Avery, high performance, 2 mil cast vinyl with permanent acrylic, pressure sensitive adhesive for the most demanding OEM automotive and marine standards. This is 'the best' in the industry. These stripes are perfect for outdoor use on all auto, RV and marine applications . We have a wide variety of size and color choices available in various configurations.
Exterior Durability:5 to 7 years
Application Instructions: Application is best if applied in temperatures between 55 and 85 degrees fahrenheit 1. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease(see our installation supplies for cleaner). 2. Remove back paper liner exposing adhesive. 3. Position striping, being careful not to stretch the vinyl. 4. Lay striping onto the application surface, then go over the entire surface gently with an application squeegee to ensure bond. 5. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. 6.To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.