Available Colors: This roll stripe is available only in the 3M colors shown in the selection list. Click on a color to see the color name highlighted. The 1/8" stripe roll is not available in Avery colors and is only available in a few select 3M colors. To match a stripe or if unsure of your color choice, we highly recommend our 3M pinstripe tape color chart for actual color samples availableHERE.
Dimensions:1/8 inch x 50 feet single line, single color stripe roll.
Features:This single color vinyl pinstripe tape is exceptionally engineered 3M, high performance, 2 mil cast vinyl with permanent acrylic, pressure sensitive adhesive for the most demanding OEM automotive standards. This auto pin striping roll is 'the best' in the industry. These stripes have unmatched quality and are perfect for outdoor durability on all auto, RV and marine applications . We have a wide variety of size and color choices available in various configurations.
Exterior Durability: 5 to 7 years
Application Instructions: Application is best if applied in temperatures between 55 and 85 degrees fahrenheit 1. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease(see our installation supplies for cleaner). 2. Remove back paper liner exposing adhesive. 3. Position striping, being careful not to stretch the vinyl. 4. Lay striping onto the application surface, then go over the entire surface gently with an application squeegee(or mild finger pressure on narrow stripes) to ensure bond. 5. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. 6.To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.