Dimensions: This kit is precut to fit the Toyota Tacoma
Features: Includes pieces for driver and passenger side (TRD 4x4 Decals Not Included)
Exterior Durability: 5 to 7 years (Extend the life of your vinyl with once a month applications of 303 Aerospace Protectant. Thousands of happy customers. Sold separately)
Application Instructions: Application is best if applied in temperatures between 55 and 85 degrees fahrenheit 1. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease(see our installation supplies for cleaner). 2. Remove back paper liner exposing adhesive. 3. Position striping, being careful not to stretch the vinyl. 4. Lay striping onto the application surface, then go over the entire surface gently with an application squeegee to ensure bond. 5. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. 6.To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.
NOTE: Having been in the auto graphics industry since the mid 80's we consider ourselves experts in the field of vinyl. Please see our FAQ section for details on the difference between high performance(cast) and intermediate material as well as links to 3M for your own research. The details may surprise you.